Inquiry
Form loading...
Battery And Inverter All In One Solar Energy System 2.5kwh With Lithium Battery

Products

Battery And Inverter All In One Solar Energy System 2.5kwh With Lithium Battery

Wall mounted energy storage system are 3kw solar inverter with 2.5kwh lithium battery all in one to save your electrical bill & back-up your power during grid outage or unavailable

    description2

    Features

    details1cj7

    *More Usable Energy 100% Depth of discharge pack level of energy optimization
    *pure sine wave inverter
    *Safe & Reliable:Safe lithium iron phosphate cell
    *All in One Design:Compact size and light weight
    * It has multiple protection functions and 360 °all-round protection
    *Easy Installation Standard design with helpful

    Details

     Model

    RGME-2.5KWH/3KVA

    Rated Energy

    2500wh

    Utiliti Mode

    input voltage

    170~280VAc

    frequency

    40~70Hz,default

    overload/short ciucuit protection

    The bypass cieciut breaker 20A

    Maximum efficiency

    99.5%

    conversion time(bypass and inverter)

    <10ms

    biggest bypass overload current

    20A

    Inverter Mode

    output

    pure sine wave

    output power

    3KVA

    battery voltage

    25.6v

    power factor

    0.9PF

    output voltage

    208/220/230/240VAC(settable) default230v

    Maximum efficiency

    >93%

    Utility charge

    Maximum charging current

    50A

    PV/Battery charging

    Type of controller

    PWM

    Largest PV open circuit voltage

    85V

    PV operating voltage range

    30~80V

    Largest PV input current

    50A

    Maximum PV input power

    2000W

    Solar charging current range

    10~50A

    Biggest mixed charging current(PV+AC)

    100A

    Protection functions

    over voltage and low voltage,over load short circuit,over temperature

    Working temparature range

    -10~50℃

    Storage temparature range

    -15~60℃

    Humidity range

    20~95%(no condensing)

    Noise level

    ≦50db

    Product size

    387*163*540


    details234j

    The figure below shows the system application scenario of this product.  A complete system includes the following parts :
    1.Photovoltaic module: convert light energy into DC power, charge the battery through an all-in-one machine, or directly invert it into AC power to the load.

    2.Utility power or generator: Connected to the AC input terminal, it can supply power to the load and charge the lithium battery at the same time. The system can also operate normally if it is not connected to the mains or generator.  At this time, the load power is provided by the battery and photovoltaic modules.

    3.Lithium battery: The function of the lithium battery is to ensure the normal power consumption of the system load when the solar energy is insufficient and there is no utility power.

    4.Household loads: can be connected to various household and office loads, including refrigerators, lamps, TVs, fans, etc.  AC load.

    5.Inverter control storage integrated machine: the energy conversion device of the whole system

    6. The specific system wiring method is determined by the actual application scenario.

    Leave Your Message